For 1 - 10 metres shipping is $17.5. For 1 - 20 metres shipping is $34.5. For 21+ metres shipping is $57.5 - Tree Rings are $34.50 for 1 or $57.50 for 2 or more
EverEdge flexible steel garden edging comes in one-metre lengths. Made from mild steel, EverEdge is available in three different depths – 75mm, 100mm and 125mm. Each length incorporates six spikes that are 95 mm long. The lengths are designed to lock together and keep a level top edge. EverEdge will bend to virtually any shape, suits all soil types and lasts for generations.
Shipping
We offer New Zealand wide shipping as follows:
For 1 - 10 metres shipping is $17.5.
For 1 - 20 metres shipping is $34.5.
For 21+ metres shipping is $57.5
Tree Rings are $34.50 for 1 or $57.50 for 2 or more
Reviews
"Everedge in New Zealand is run by friendly and efficient people who go out of their way to meet their clients’ needs, even when the materials needed are challenging and complex. Go look, go see!"
“EverEdge is easy to use and much easier to install than wooden edges”
“Amazing product, quick delivery and easy to put together. Makes my garden edges look fantastic. Highly recommended.”
"Awesome product, quick and friendly service"
"Highly recommend! Rapid responses, super fast product delivery and very very polite! Great service and product. Highly recommend!!!"
FAQ
How can EverEdge Garden Edging be bent?
EverEdge garden edging offers remarkable flexibility, allowing it to easily conform to various curves and angles. To create a curve, you can either bend the section by hand or wrap it around a form or tire. When aiming for an angle, begin by marking a line at the desired bending point, then utilize a sharp right angle, such as another EverEdge piece, timber, the edge of a table, a vice, or a workbench, to form the angle.
What depth should I select for my Garden Edging?
EverEdge garden edging is available in three depths: 75mm, 100mm, and 125mm. The spike lengths are 95mm or 100mm, depending on the length of the EverEdge. We recommend burying the EverEdge until the top of the spike is level with the edging's face, which amounts to a 15mm depth. If your desired edge size is different from the available options, such as 50mm, you can adjust by burying the 75mm EverEdge deeper until you achieve the desired depth.
Is it possible to cut EverEdge Garden Edging?
Cutting EverEdge is a straightforward process and can be done using either a grinder or a hacksaw. To eliminate any excess material, it is best to overlap it behind the starting point if feasible. Alternatively, if you are not returning to the starting point, create a 90° bend and remove the excess along a wall, bank, or flower bed. This method will also provide additional strength at the end of the edging run.
What should be the installation depth for EverEdge?
The top of the EverEdge should never protrude above the lawn if you plan to mow over the edge. It is essential to ensure that the edging's top is level with the turf, just below the grass's cutting height. This information is indicated in the installation guide provided when purchasing EverEdge.
How long will EverEdge Garden Edging last?
EverEdge garden edging is constructed from galvanized mild steel, featuring a rust-resistant powder coated finish. Once installed, EverEdge requires no maintenance and can endure for generations.
What does Cor-Ten Garden Edging look like upon arrival?
Upon delivery, Cor-Ten garden edging will not exhibit the rusty patina it develops over time. Instead, it will appear as dull blue steel. Depending on the conditions, it typically takes between 3-6 months for Cor-Ten to develop a full rusty appearance, but this transformation can continue over a 12-month period.
Can EverEdge Garden Edging be installed above ground level?
As a general guideline, it is recommended to install EverEdge so that the top of the edging is level with the turf, not above it. However, in certain installations, it may be desirable to have the edging visibly displayed. It's important to note that Cor-Ten and Galvanised (unpainted) edging can have sharp edges, so if the edging will be installed above ground level, these finishes are not recommended for households with dogs or small children.
How should I install EverEdge Garden Edging in soft or clay ground?
In very soft or clay soil, simply stepping on the edge or the weight of a lawnmower can cause the edging to sink into the ground. To prevent this, you can place a piece of broken flat tile or brick under each joint or any location along the edging where extra support is needed. Additionally, utilizing the Pin & Sleeve system can help anchor and stabilize the edging in such conditions.
